Hires

All prices are exclusive of VAT. Minimum hire is one week, with a minimum charge of £100. Discounts will be automatically calculated for hires longer than one week. Hires are available to UK customers only. Delivery and collection are extra: smaller items can be sent by post or courier; larger items can be delivered by courier. If you have any questions or special requirements feel free to email me.

Mixing desks & Input/Output devices

Yamaha QL1 mixing desk
16 analogue mic inputs, 32 Dante inputs to 40 input channels. 8 internal FX racks and 4 Premium FX racks. 16 Mix and 8 Matrix outputs, plus stereo and mono outputs for 27 output channels. Two MY card slots allow further expansion using MY-AUD Dante or MY-16AT dual ADAT cards.


Yamaha LS9-32 mixing desk
32 analogue mic inputs to 72 input channels. 4 internal FX racks. 16 Mix outputs, plus stereo and mono outputs for 19 output channels. Two MY card slots allow further expansion using MY-AUD Dante or MY-16AT dual ADAT cards.

DSC_0926.JPG

Yamaha Rio1608 stagebox
This 16 input, 8 out stage box communicates with mixing desk, DME, MRX7-D, or Dante computer using Dante audio networking.

rio1608.jpg

Yamaha Tio1608 stagebox 
This 16 input, 8 out stage box communicates with mixing desk, DME, MRX7-D, or Dante computer using Dante audio networking.


Yamaha DME24
Provides 8 analogue inputs and outputs, plus 16 more inputs and outputs via an MY card slot allowing further expansion using MY-AUD Dante or MY-16AT dual ADAT cards. The DME is programmed using Yamaha DME Designer software (free, PC only) which allows the DME to be configured in any arrangement desired using a toolkit of delays, EQs, matrixes, delay matrixes, mixers, reverbs and other components. Supplied with analogue 16-way XLR patch bay wired to the 8 analogue inputs and 8 analogue outputs.


Yamaha MRX7-D
Provides 64 Dante inputs and 64 Dante outputs, 8 analogue inputs and outputs, plus 16 more inputs and outputs via an MY card slot allowing further expansion using MY-AUD Dante or MY-16AT dual ADAT cards. The unit is programmed using Yamaha MRX Designer software (free, PC only) which allows the unit to be configured in any arrangement desired using a toolkit of delays, EQs, matrixes, delay matrixes, mixers, reverbs and other components. Supplied with analogue 16-way XLR patch bay wired to the 8 analogue inputs and 8 analogue outputs.


Focusrite RedNet 3
This unit converts between Dante, ADAT and AES signals. It can be used in a range of scenarios, for example to convert Dante to ADAT, Dante to AES/EBU (to get a digital device like a Lexicon PCM81 on Dante). Can be used in conjunction with a Ferrofish A16. NB this does not have a Dante secondary port. 

focusrite-rednet-rear.jpg

Ferrofish A16
This unit converts between ADAT, MADI and analogue signals. It has 16 inputs and 16 outputs in all formats. Can be used in conjunction with RedNet 3 to get 16 analogue inputs in and out of Dante, or with a Yamaha MY-16AT dual ADAT card to get 16 additional analogue inputs and 16 outputs on a Yamaha mixer, DME24, or MRX7-D.


Control Bits


MIDI bits